AVG 9.0 FILE SERVER - REV 90.1 User Manual download pdf

Description

The HFBR-56xx/HFCT-56xx family of interface converters

meet the Gigabit Interface Converter specification Rev.

5.4, an industry standard. The family provides a uniform

form factor for a wide variety of standard connections

to transmission media. The converters can be inserted

or removed from a host chassis without removing

power from the host system.

The converters are suitable for interconnections in the

Gigabit Ethernet hubs and switches environment. The

design of these converters is also practical for other

high performance, point-to-point communication

requiring gigabit interconnections. Since the converters

are hot-pluggable, they allow system configuration

changes simply by plugging in a different type of

converter.

The mechanical and electrical interfaces of these

converters to the host system are identical for all

implementations of the converter regardless of external

media type. A 20-pin connector is used to connect the

converter to the host system. Surge currents are

eliminated by using pin sequencing at this connector

and a slow start circuit. Two ground tabs at this

connector also make contact before any other pins,

discharging possible component-damaging static

electricity. In addition, the connector itself performs a

two-stage contact sequence. Operational signals and

power supply ground make contact in stage 1 while

power makes contact in stage 2.

Features

• Compliant with Gigabit Interface Converter

specification Rev. 5.4 (1)

• HFBR-5601 is compliant with proposed

specifications for IEEE 802.3z/D5.0 Gigabit Ethernet

(1000 Base-SX)

• HFCT-5611 is compliant with the ANSI 100-SM-LC-L

revision 2 10 km link specification

• Performance:

HFBR-5601:

500 m with 50/125 µm MMF

220 m with 62.5/125 µm MMF

HFCT-5611:

550 m with 50/125 µm MMF

550 m with 62.5/125 µm MMF

10 km with 9/125 µm SMF

• Horizontal or vertical installation

• AEL Laser Class 1 eye safe per IEC 60825-1

• AEL Laser Class I eye safe per US 21 CFR

• Hot-pluggable

Applications

• Switch to switch interface

• High speed I/O for file servers

• Bus extension applications

Summary of Contents

Page 1 - Data Sheet

DescriptionThe HFBR-56xx/HFCT-56xx family of interface convertersmeet the Gigabit Interface Converter specification Rev.5.4, an industry standard. The

Page 2

10HFBR-5601Transmitter Optical Characteristics(TA = 0°C to +60°C, VCC = 4.75 V to 5.25 V)Figure 2. Transmitter Optical Eye Diagram Mask1.31.00.80.50.2

Page 3

11Long Wavelength GBIC: HFCT-5611Transmitter SectionThe transmitter section consists of a 1300 nm MQWFabry Perot Laser in an optical subassembly (OSA)

Page 4

12HFCT-5611Transmitter Electrical Characteristics(TA = 0°C to +60°C, VCC = 4.75 V to 5.25 V)Parameter Symbol Min. Typ. Max. Unit NotesTransmitter Diff

Page 5

13HFCT-5611Transmitter Optical Characteristics(TA = 0°C to +60°C, VCC = 4.75 V to 5.25 V)Parameter Symbol Min. Typ. Max. Unit NotesOutput Optical Powe

Page 6 - 10 km Link Support

For product information and a complete list of distributors, please go to our web site: www.avagotech.comAvago, Avago Technologies, and the A logo are

Page 7 - Table 3. Module Definition

2Note: HFBR-5601 is non-compliant for Tx fault timing.The HFBR-5601 has been developed with 850 nm shortwavelength VCSEL technology while the HFCT-56

Page 8 - 1.00 1.58 W 5

3GBIC Serial ID Memory Contents - HFBR-5601Addr Hex ASCII Addr Hex ASCII Addr Hex ASCII Addr Hex ASCII0 1 40 48 H 68 39 9 96 201 7 41 46 F 69 38 8

Page 9

4GBIC Serial ID Memory Contents - HFCT-5611Addr Hex ASCII Addr Hex ASCII Addr Hex ASCII Addr Hex ASCII0 1 40 48 H 68 39 9 96 201 6 41 46 F 69 38 8

Page 10

5Figure 1. Outline Drawing of HFBR-5601 and HFCT-5611.

Page 11 - 1.00 1.58 W 4

6Regulatory ComplianceFeature Test Method Targeted PerformanceElectrostatic Discharge(ESD) to the ElectricalPinsMIL-STD-883CMethod 3015.4Class 1 (>

Page 12

720-Pin SCA-2 Host Connector CharacteristicsTable 1. SCA-2 Host connector pin assignmentPin Name Sequence Pin Name Sequence1 RX_LOS 2 11 RGND 12RGND21

Page 13 - RX_LOS D

8Short Wavelength GBIC: HFBR-5601Transmitter SectionThe transmitter section consists of an 850 nm VCSEL inan optical subassembly (OSA), which mates to

Page 14

9HFBR-5601Transmitter Electrical Characteristics(TA = 0°C to +60°C, VCC = 4.75 V to 5.25 VParameter Symbol Min. Typ. Max. Unit NotesTransmitter Differ